| General | |
|
Size/Weight
|
173x82x37mm/ 350g
|
|
Display
|
3.5 Inch TFT LCD, 320x480 Resolution
|
|
Interface
|
Micro USB
|
|
Power Supply
|
5V DC, 2A; 4000mAh/3.7V Lithium battery (with air traffic certification)
|
|
Working Time
|
>12 hours (Continuous measurement); Standby>20 hours
|
|
Language
|
Chinese, English
|
|
Environmental Conditions
|
Operating temperature and humidity: -10℃~+50℃, ≤95% (non-condensation)
Storage temperature and humidity: -40℃~+70℃, ≤95% (non-condensation)
|
|
Network State Tester
|
|
|
ONT States
|
Online, Offline, ONT Fatal, ONT Bad, ONT No Power, Fiber Fall Off
|
|
Insertion Loss
|
<1.5dB
|
|
Connector
|
FC/SC/ST
|
|
PON Power Meter
|
|
|
Testing Range
|
-35 to +10dBm @1310nm (upstream)
-40 to +12dBm @1450nm (Downstream)
-40 to +25dBm @1550nm (Downstream)
|
|
Unit
|
mW/uW/nW/dBm/dB (REF)
|
|
Accuracy
|
0.5dB
|
|
Resolution
|
0.01dB
|
|
Visual Fault Locator
|
|
|
Wavelength
|
650nm
|
|
Output Power
|
10mw, CLASSIII B
|
|
Range
|
12km
|
|
Launching Mode
|
CW/1Hz/2Hz
|
|
Adapter Type
|
2.5mm Universal Adapter for FC SC ST Connectors
|
|
Rj45 Cable Tracking
|
|
|
Range
|
300m
|
|
Signal Type
|
Analog signal/Digital Signal
|
|
Signal Receiver
|
Optional
|
|
Warning Sound
|
Support
|
|
Cable Type
|
568A, 568B
|
|
Rj45 Cable Sequeence
|
|
|
Range
|
300m
|
|
Signal Type
|
Analog Signal/Digital Signal
|
|
Active Cable Test
|
Not Support
|
|
Testing Time
|
Less Than 15 Seconds
|
|
Remote Unit
|
Can be took out from bottom of the device
|
|
Rj45 Cable Length
|
|
|
Range
|
300m
|
|
Signal Type
|
Analog signal/Digital Signal
|
|
Active Cable Test
|
Not Support
|
|
Testing Time
|
Less than 15 seconds
|
You may also be interested in the following product(s)
FF-3115 Optical Light Source OLS |
FF-VFL-C Visual Fault Locator |
FF-3306G Optical Fiber Identifier with VFL and OPM |
FF-3303A/B Optical Variable Attenuator |
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
