Features
• Low insertion loss and high return loss
• High reliability, and save maintenance cost
• Pre-embedded fiber is polished in high quality
• Can be reusable with easy disassembly and assembly
• Can work stably in harsh environment, like severe coldness and dust, high temperature, high humidity, etc
• Few special installation tools required, installation is simple and fast, with less than 30 seconds averagely;
• low technical requirements for the operators
Applications
• Telecommunication networks
• FTTX, FTTH (Fiber to the Home)
• Fiber testing and testing equipment
• FTTH Drop Cable, 86 socket outlet, and ONU
Specifications
|
Connector Type |
SC/APC |
|
|
Applicable Cable |
0.9mm, 2.0mm, 3.0mm Cable; 2.0x3.0mm FTTH Drop Cable |
|
|
Fiber Diameter |
125um |
|
|
Coating Diameter |
250um |
|
|
Fiber Mode |
single mode |
|
|
Insertion Loss |
≤0.2dB (max. 0.5dB) |
|
|
Return Loss |
APC≥55dB |
|
|
Dimension |
53.5(L)*9.0(W)*7.3(H)mm |
|
|
Lifespan |
10 years |
|
|
Tensile Strength |
>30N |
|
|
Temperature Cycling |
IL<0.3dB; RL<5dB |
|
|
Mechanical Performance |
Assembly Repeatability |
≥5 times |
|
Drop (1.5m height) |
≥10 times |
|
|
Durability |
≥500 times |
|
|
Working Environment |
Relative Humidity |
≤95% (@±30°C) |
|
Atmospheric Pressure |
60kpa~160kpa |
|
|
Operating Temperature |
-40°C~+85°C |
|
|
Storage Temperature |
-40°C~+85°C |
|
You may also be interested in the following product(s)
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
