Search Site

FF-3115 Optical Light Source OLS

SKU: 2312271324

 Sales Rep  Tech Support

Handheld Optical Laser Source is mainly for fiber optic network site installation, acceptance and maintenance of fiber optic cable, optical passive components
of the transmission and loss measurement needs of the new design and development of products.
The light source can provide 1 to 4 wavelengths of stable output for customers choice.
- Support CW and a variety of
modulation light output
- Output optical power adjustable,
Adjustment range 6dB, step
- Support automatic shutdown
- Backlight intelligent control
Model FF-3115A FF-3115B FF-3115C FF-3115D
Working wavelength 1310/1550nm 850/1300nm 1310/1490/15550nm 850/1300/1310/1550nm
Fiber Type 9/125nm single mode fiber 62.5/125nm multi mode fiber 9/125nm single mode fiber both singmode fiber and multi mode fiber
Laser Type FP-LD
Output Power <=-5dBm
Stability +/-0.02dB/8h
Modulation CW/270Hz/1000Hz/2000Hz
Output power adjustable Range 0 to 6dB, 1dB step 
Connector FC/SC/ST
Power 3* AA batteries
Auto power off 10 mins
Continuous working time >72 hours
Working Temperature -10 to +50℃
Storage Temperature -40 to +70℃
Size 186x100x50mm
Weight 150g

Use spaces to separate tags. Use single quotes (') for phrases.

Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.



The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem.



The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.



Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply.



The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.