The FC-90T fiber cleaver is available with a 3-in-1 fiber holder for 250um bare fiber, 0.9mm fiber cable and 2.0/3.0/2x3mm fiber cable. It also supports ribbon fiber cutting up to 12 cores.
It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving. Built on a robust high quality platform, the cleaver is ideal for use with fusion splicing or other precision applications, setting a new standard for flexibility and performance. A fiber scrap collector can be installed with the cleaver to help maintain loose scraps, resulting from the cleaving task.
Features
1) 48000 cutting times
2) Suitable for 0.125mm bare fiber
3) Protection cover lock easily
4) One step fiber cleaving
5) <0.5° cleaving angle
6) 16 cutting location for each blade
Specification
| Model |
FC-90T
|
|
Bare Fiber Diameter
|
125um
|
|
Fiber Cable Type
|
1 to 12 cores (Ribbon)
|
|
Cleaved Length
|
9 to 17mm
|
|
Cutting Angle
|
<0.5
|
|
Cutting Times
|
48000
|
|
Blade Hardness
|
HRA92.5
|
|
Weight
|
253g
|
|
Dimension
|
70x90x50mm
|
Reasons for bad fifiber cutting
You may also be interested in the following product(s)
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
