Search Site

GPON FTTH optical receiver with WDM /micro WDM optical node SC APC Duplex Connector with 2 output WDM for PON FTTH OR20 CATV

SKU: 1904070011

 Sales Rep  Tech Support

* Required Fields

- Advanced aluminum house with good heat Dissipation
- Full-GaAs MMIC application with low noise. Digital signal is received -18dBm at lowest and analogy signal -9dBm at lowest.
- AGC control range: 0~-9dBm, output level keep unchanged.
- Low power consumption, high-efficiency switch power can make sure the high reliability and stability of power supply. Power consumption less than 2W. It adopts optical detecting circuit.
- Multi-stage anti-thunder devices (TVS transient suppression diode), strictly anti-thunder system to ensure the safe operation of the equipment
- Built-in WDM,single-fiber to the home (1490/1310/1550nm) triple-play application can be realized.
- Built-in isolator can split the two optical waves (1490nm and 1310nm)
- Output gain adjustable (0~18dB),output level >80dBuV.It can realize the power supply of 8V input port feeding.
- One output or two outputs.


Item Unit Paramter Supplement
Optical wavelength   nm 1260~1620  
Optical input range (dBm)                  +2~-10 Analog TV
+2~-22 Digital TV
Output return loss    (dB) ≥45  
Bandwidth MHz 47~862/1000  
Flatness dB ±0.75  
RF output level   (dBuv) ≥82(1 port) Pin:-9~0dBm
≥76(2 ports)
AGC control range   (dBm) 0~-9  
AGC character dB ≤±0.5 Pin:-9~0dBm
ATT (dB) 0-20 MGC
Output return loss     (dB) ≥14 47-862MHz
Output impendance      (Ω) 75  
CNR dB ≥51 Pin=-2dBm
CTB dB ≥61 Pin=-2dBm
CSO dB ≥60 Pin=-2dBm
Power supply V +8VDC  
Power consumption     W ≤3 +8VDC,250mA
Operating temperature  (℃) -20~+60  
Dimension mm 79*98*25.5  



Use spaces to separate tags. Use single quotes (') for phrases.

Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.



The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem.



The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.



Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply.



The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.