The Bench-top Insertion/Return Loss Testing Meter provides a high reliable and stable performance. It is a multi-functional optical testing meter which is integrated with stable laser source, optical power meter, insertion loss tester and return loss tester. This testing meter is suitable for optical communication project as well as the research and manufacturing of optical active and passive components.
Features:
- Bench-top, selectable modular type structure
- Stable laser source
- Using high precise optical detector
- User can easily switch among three testing modes: optical power meter mode, return loss mode and insertion loss mode
- Linear optical power and logarithm optical power display
Specification:
| Return Loss: | |
| Working Wavelength | 850 & 1300nm |
| Detecting Range | 0~55dB |
| Calibration Wavelength | 850/1300nm |
| Uncertainty | 0~55dB: 0.4dB |
| Display Precision | 0.001 (can be set) |
| Power Meter: | |
| Calibration Wavelength | 850/1300/1310/1490/1550/1625nm |
| Testing Range | -70~10dBm |
| Uncertainty | 5%±0.1nW@1550nm (23°C±3°C) |
| Display Precision | 0.001 (can be set) |
| Laser Source: | |
| Selectable Wavelength | 850/1300nm |
| Output Power | -2dBm±0.5dB |
| Stability | 0.05dB/15min (23°C±3°C, tested after 30min warming-up) |
| Other Parameters: | |
| Power | AC100~240V 50/60Hz |
| USB Connection | Yes |
| Dimension | 260×110×310nm |
| Weight | 3kg |
| Working Temperature | 0~40°C |
| Storage Temperature | -20~+70°C |
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
