Hello! Welcome
Search Site

XGT-200 10G Ethernet Tester

SKU: 1702102330

XGT-200 10Gbit Ethernet Tester

The Ethernet tester XGT200 provides a complete test for next generation Ethernet solution. There are many different test modules, it can help clients to verify the performance of their Ethernet. XGT-200 have two 10/100/1000Mb/s RJ45, and two 10Gbps SFP+ it can generate  test profession streams that you need  and analyze  them ,then provide the test result. XGT-200 provide install and maintain services and activate new profession service. XGT-200 can provide many kinds of test functions, it can help you to control and know the quality of your Ethernet.



- Smart and durable, field application ready
- HD color touch screen, sun readable
- User-friendly user interface
- PC remote control
- Test profiles and data management, USB/FTP transfer
- Lithium battery up to 4 hours continuous testing 



- 10M~10Gb/s bandwidth, LAN and WAN mode
- RFC2544 and Y.1564 test
- Layer 1/2/3/4 BERT test
- Multi-stream traffic generation and analysis
- Packet capture
- VLAN and VLAN Q-in-Q test
- MPLS test with multiple MPLS tags
- ODT test
- CoS and ToS/DSCP priority testing
- Statistical analysis report
- Ethernet and advanced IP connectivity test
- Intelligent detection and remote control loopback test

XGT-200 10G Ethernet Tester

Use spaces to separate tags. Use single quotes (') for phrases.

Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.



The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem.



The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.



Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply.



The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.

Product Reviews

Write Your Own Review

You're reviewing: XGT-200 10G Ethernet Tester

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars