Stainless steel band is applied with suspension clamps, anchor clamps and hooks on dead-end and intermediate routes, of main or end use electrical connections.
Stainless steel bands are made of stainless steel of different grades: SUS201, SUS202, SUS304, SUS316 and SUS409. The stainless steel band has superior elongation value.
Stainless steel band is the strongest way of securing with heavy loads, when fixing items with high tensile strength.
Installation:
- Cut the stainless steel strap with needed length by strap banding tool
- Put on it the stainless steel buckle
- Fix the strap by moving the strap banding tool wheel (or ratchet), then cut the band.
Application:
Electrical fastening solutions, in construction of electrical distribution lines: low voltage and high voltage ABC lines, overhead transmission lines, telecommunication lines, construction of outdoor passive optic networks, street or traffic signs and video cameras, tubes and other pole hardware, marine and railway transportation
Specification:
| Material | SUS201 | SUS202 | SUS304 | SUS316 | SUS409 |
| Width | 1/4” (6.4mm) | 3/8” (9.5mm) | 1/2” (12.7mm) | 5/8” (16.0mm) | 3/4” (19.0mm) |
| Thickness | 0.015” (0.4mm) | 0.02” (0.5mm) | 0.025” (0.64mm) | 0.028” (0.7mm) | 0.03” (0.75mm) |
| Length/Roll | 30m or 50m | 30m or 50m | 30m or 50m | 30m or 50m | 30m or 50m |
| Plastic Color | Red | Green | Blue | Purple | Yellow |
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
