The tester is designed for present all kinds of xDSL line including ADSL, ADSL2, ADSL2+, READSL, VDSL2. It not only can test xDSL physical layer parameter, but also can help you to confirm whether your line is proper to provide xDSL service. It also can evaluate your line quality. It also can have PPPoE dial, do IE network page browsing, and emulate user's PC+ Modem by inside Modem of ST330 to test the connection between user and ISP provider. You can have all kinds of test such as Ping, Ipconfig, Rouge, Tracert after successful dial. ST330 also can emulate the user's PC to test broadband IP line or have PPPoE dial by user's Modem to test the connection of IP network and Modem problem or to remove the problem arisen by computer.
Key Features
- Modular platform design
- To identify and adapt the DSL line connect mode automatically
- WINCE display and touching operation for user's easy operation
- Remote software upgrade
- Link to USB equipment, keyboard, mouse and memory key by USB port
Main Functions
xDSL Test
- Physical layer test
- PPPoE dial and PPPoE dial properties change
- Network layer test (Ping, Ipconfig, Tracert and Route)
- IE Webpage browsing test function
LAN Test
- LAN port PPPoE Dial and properties change function.
- Network layer test (Ping, Ipconfig, Tracert and Route).
- Fixative IP scanning function.
- Webpage browsing function.
DMM Test
- AC/DC voltage
- Loop resistance
- Capacitance
- Insulation
- MODEM Emulation
- Perform MODEM Emulation function to dial and log on internet to check faults.
File Management
- Record browsing
- File transfer among the tester, memory key and PC
Help
- System Software Upgrade
- Function Set
- Screen Recalibration
Technical Specifications
|
Chip Set: |
Globespanvirata |
|
Relevant Standards:
|
ANSI T1.413 issue #2 ITU-T G.992.1 (G.DMT) ITU-T G.992.2 (G.Lite) ITU-T G.992.5 ITU-T G.992.5 Annex L ITU-T G.994.1 (G.hs) ITU G.993.2 (VDSL2) |
|
Physical Layer Test |
|
|
ADSL2+ Module: |
|
|
Attenuation (dB): |
0~63.5 |
|
Noise margin (dB): |
0~32 |
|
Up channel speed (Mbps): |
0~1.2 |
|
Down channel speed (Mbps): |
0~24 |
|
The max test distance: |
6.5 km |
|
DMT sub channel bit number |
0~15 |
|
State display |
Signal loss, connection close. |
|
DSL line up/down maximum rate and capacity ratio |
|
|
DSL line local output power |
|
|
DSL line error number (CRC,HEC, FEC,NCD,OCD) |
|
|
ADSL2 Module: |
|
|
Attenuation (dB): |
0~63.5 |
|
Noise margin (dB): |
0~32 |
|
Up channel speed (Mbps): |
0~1 |
|
Down channel speed (Mbps): |
0~8 |
|
DSL line error number (CRC,HEC,FEC,NCD,OCD) |
|
|
DSL line local output power |
|
|
DSL line connection mode |
|
|
VDSL2 Module: |
|
|
Be compatible with ADSL2+, ADSL standard. |
|
|
DSL line attenuation |
|
|
DSL line noise margin |
|
|
DSL line up/down channel speed (Inter/Fast mode) |
|
|
DSL line up/down maximum rate and capacity ratio |
|
|
DMT sub channel bit number:0~15, and each sub channel frequency points |
|
|
DSL line error number (CRC, HEC, FEC, LCD, OCD) |
|
|
DSL line local output power |
|
|
State display: signal loss, connection close |
|
|
DSLAM information |
|
|
Error Code Second |
|
|
Impulse Noise Protection (INP) |
|
|
Support the first 7 profiles in total 8 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a |
|
DMM Test |
|
|
DC voltage (V): |
0~400 |
|
AC voltage (V): |
0~400 |
|
Loop resistance(Ω): |
0~20000 |
|
Capacitance (nF): |
0~1000 |
|
Insulation resistance (MΩ): |
0~50 |
|
Other Specifications |
|
|
Memory capacity: |
20 M |
|
Display:
|
240×320 LCD, touch screen, Embedded OS, windows interface |
|
Power Supply |
System highest power: 7.1W Internal: Rechargeable 7.4 V 2700mAH Li-ion battery |
|
Battery Duration: |
8hs (except Modem status) |
|
Dimensions/Weight: |
176mm×130mm×60mm/0.7kg(With battery) |
Package
- VDSL2 Tester x1
- Power charage x1
- Direct Ethernet Network line x1
- Test cord x1
- User manual x1
- Carry case x1
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
