The main function characteristics:
The connectivity test can be carried out, single cable
And can detect 5E, 6E Internet Network cable and telephone line wiring fault, open circuit,short circuit, including: cross connection, reverse connection and series wound
Localization and connection / connection error.(But not for shielded cables，STP cable cannot work)
And measuring cable length, and location of the specific location of open circuitshort circuit
And the length of the cable dynamic calibration function, make the lengthmeasuring accuracy is as high as 97%
- easy to use, large screen display the test results stick out a mile
And easy to carry, long battery life (50 hours of standby time)
Automatic delay shutdown
And there are no length measurement and matched pairs were inserted on distalrecognizer can
And cable location, 8 distal passive testing socket (identification number ID1-ID8)
And the distal identification appliance audio prompt function
And self checking function, can automatically compensate the variation of the battery power, the influence of environmental temperature change
And MCU software watchdog design, reliable operation
You may also be interested in the following product(s)
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
