Sales@FirstFiber.cn
Search Site

Cable Tracker Aimo MS6812 Wires Trace Telephone line Detector Continuity Test diagnose the break point

SKU: 1902240108

 Sales Rep   sales@FirstFiber.cn  Tech Support  tech@FirstFiber.cn

Cable Tracker Aimo MS6812 Wires Trace Telephone line Detector Continuity Test

 

The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line,it can identify some state in the line,and more convenience to install, debug, maintain telephone line.There are a Sender(MS6812-T)and a Receiver(MS6812-R) included in The Cable Tracker.

 

Functions:
 
Judge continuty of the cables or wires.
Track the cables or wires,and diagnose the break point.
Receiver the tone signal on the cables or wires(telephone line).
Indentify the state in the working telephone line(clear,ring,busy).
Send a single solid tone or a dual alternating tone to the object cables or wires.
 
 
Specifications:
 
Audio signal: 1.5kHZ
Receiving frequency range: 100HZ-300kHZ
Battery supply: 9V (6F22) × 1(not included in the package)
Size: Receiver end 238 x 43 x 26mm Transmitter 145 x 35 x 25
 
 
Attention :
 
When nonuse,take away the Sender fromthe test circuitry,and switch to "OFF".
Keep away from moisture.
Do not use the tester under the hight voltage enviroment. Always follow this user's manual, otherwise it may cause the damage to the tester or personal injury.
 
 
Package includes:
 
1 * Sender MS6812-T
1 * Receiver MS6812-R
1 * Portable bag
1 * retail package





Use spaces to separate tags. Use single quotes (') for phrases.

Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.

firstfiber_warranty

ISO9001:2008

The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem.

          firstfiber_warranty

CE

The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.

 
         
firstfiber_warranty

RoHS

Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply.

  firstfiber_warranty

FCC

The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.