We provides high quality Ferrule Mate Cleaner for φ1.25 optical ferrule. The cleaner is composed with special cleaning reel, extendable nuzzle and guide cap of specified size. These make the cleaner meet rigorous requirements of the cleaning solution. Also, they are a hig-performance device designed for cleaning the end-faces for any 1.25mm connectors LC MU with UPC and APC polishes.
The Cleaner is an easy-to-use option for cleaning 1.25mm ferruled connectors in adapters. Simply insert the Cleaner into an adapter and push until an audible "click" is heard. The Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently, cleaned. The Cleaner is a must-have for field technicians. Small enough to fit in a shirt pocket and a great addition to cleaning kits.
Specification
• 1.25mm cleaner for LC MU connectors
• Suitable for both male(ferrule) and female(adapter) connectors
• Simple pushing motion to engage tool
• Audible Click to alert the operator when tools is fully engaged
• Over 800 plus engagements per unit
• Dry cleaning strand eliminates the need for solvents to be effective
• Effective with variety of contaminants
You may also be interested in the following product(s)
SC/APC Field Fast Assembly Connector for 0.9mm 2.0mm 3.0mm Indoor Cable and FTTH Flat Cable |
"Small D" FC/APC Adapter |
MTP/MPO Full Flange Black Fiber Optic Adapter |
SC/APC Adapter with Shutter |
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
