The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
Features:
1) Absolutely sealed up, IP55
2) PC & ABS material for wet-proof, water-proof, dust-proof, anti-aging
3) Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one
4) Feeder cable, pigtails, patch cords go through their own path without disturbing each other
5) Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation
6) Can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor
|
Model |
Description |
Size |
Max Capacity |
Size |
Cable ways |
||
|
A*B*C(mm) |
SC |
LC |
PLC |
D*E (mm) |
|||
|
FF-FTB16R |
Distribution Box |
343*281*90 |
16 |
32 |
16(SC) |
89.5*187 |
Not cup-joint / cup-joint |
You may also be interested in the following product(s)
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
