FF-3313 PON Terminal Tester is a newly designed fiber optic tester, it aims at PON network installation, PON network maintenance. It can show 7 states of ONT and OLT.It can find problem of PON network easily.
Feature:
1.Self-patent for PON network terminal analysis and troubleshooting
2.Intelligent troubleshooting of optical network terminal resources occupied or idle
3.Smart to determine the light cat is not turned on, the end of the fiber fracture and the optical connector off
4.Support return loss detection, qualitatively determine the optical path, optical connector installation quality; escort high-speed optical communications
5.Fully support PON optical power meter function
6.Support 1310nm and 1550nm stable light source output mode
7.Support standard optical power meter mode
8.Support red light (visual fault location) mode
9.Support Chinese / English language switch
10Support threshold setting
11.Support alkaline batteries, rechargeable batteries, AC adapter power supply
12.Intelligent power management and power detection capabilities
13.Support date and time settings
14.Support power saving mode
pecification:
| Model | FF-3313 PON Terminal Tester | |||
| PON Terminal Tester module | ||||
| Test mode | 7 states(1、Online 2、Break 3、Rogue cats 4、ONT Bad 5、ONT Fatal 6、No power 7、Fall off) | |||
| Insertion loss（dB） | ≤1.5 | |||
| Optical interface | (FC\SC\ST)PC | |||
| PON Optical Power Meter module | 1310 upstream | 1490 downstream | 1550 downstream | |
| Measurement Range（dBm） | +10～-35 | +12～-40 | +25～-40 | |
| OPM Uncertainty（dB） | ≤0.5 | |||
| Calibration Wavelength（nm） | 1310/1490/1550/1625 | |||
| Display resolution（dB） | 0.01 | |||
| Optical Power Meter module | ||||
| Calibration Wavelength（nm） | 1310/1490/1550/1625 | |||
| Probe type | InGaAs | |||
| Detection range (dBm) | +6~-70 | |||
| Uncertainty (dB) | ±0.5 | |||
| VFL module | ||||
| Wavelengths | 650±20 | |||
| Output optical power (mW) | ≥ 1 | |||
| Light Source module | ||||
| Wavelengths | 1310±20 & 1550±20 | |||
| Output optical power (dBm) | 0~±0.5 | |||
| Others | ||||
| Monitor | Color TFT | |||
| Power supply | Standard: 3 AA1.5V alkaline batteries Customization: Rechargeable Battery DC 5V Adapter |
|||
| Communication interfaces | Mini USB | |||
| Battery working hours (h) | ≥ 10 | |||
| Operating temperature ℃ | -5～40 | |||
| Storage temperature ℃ | -10～70 | |||
| Humidity | 0～95%(non-condensation) | |||
| Weight(g) without battery and jacket | 423 | |||
| Dimension(mm) | 192×102×50 | |||
| Standard Packages: | ||||
| FF-3313 PON Terminal Tester , Operation manual, Cotton swab, Certificate, Patchcord SC / PC-SC / PC, Adapter (FC\SC\ST)PC, USB cable(mini 5pin to 4pin), PC software,Electronic manual document | ||||
You may also be interested in the following product(s)
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
