FF-980REV OTDR curve is ok, but there is nothing in event list area

Home »
Blog »
FF-980REV OTDR curve is ok, but there is nothing in event list area

FF-980REV OTDR curve is ok, but there is nothing in event list area

2022-02-10

FF-980REV OTDR curve is ok, but there is nothing in event list area. What can I do? This issue should be caused by incorrect threshold value. Please reset all parameters to factory setting.

« Back

Blog

How to solve the problem of 980EXT getting stuck in the upgrade interface

The 980EXT OTDR works well always. But now it is stuck in the upgrade interface, eventhough I did not upgrade it. How to solve it?
view more»
A thorough understanding of OTDR online testing in an article

Recent years, many OTDR manufacturers and suppliers declare their OTDRs support online testing, but some times, it is a trap if you do not understand what is OTDR online testing clearly. This artical will explain what is OTDR online testing.
view more»
How to solve Application Error of 8000MAX OTDR

By these steps to solve the problem "Application OTDR.exe encountered a serious error and must shut down",
view more»
How to upgrade 980EXP OTDR

Connect OTDR to your PC by USB cable that comes together with OTDR. (some USB cables is without data transimission function, just for power charging)
view more»
980REV OTDR Ceramic Tube Came Out

One customer complains the ceramic tube came out! check below photo, how can we gix it? Can we remove it for common use? The ceramic tube is from SC connector, not from the OTDR. please pull out the ceramic tube from OTDR slightly, and then install back to SC connector. If it is not easy to installed back, please buy a new SC connector. You can find many suppliers of the connector in the market.
view more»

FF-980REV OTDR curve is ok, but there is nothing in event list area

Submit Comment