The FirstFiber MPO Breakout Cassette is a pre-terminated, factory tested, modular system that provides simplified installations in the field. Breakout cassettes offer a reliable access point for MPO backbone cables to convert over to individual duplex LC connectors. Utilizing pre-terminated cable assemblies and patch cables in conjunction with breakout cassettes allow for simplified cable management, fast deployment, and easy access during network upgrades.
When deploying an MPO Breakout Cassette in a network, it is critical to match the connectivity type of the module to the other components (breakout cassettes, patch cables, and trunk cable) that are used within the link. Common connectivity methods are referred to as Type A, Type B, and Type C and each require a pair-wise flip at some point in the link. FirstFiber MPO Breakout Cassettes are built with Type A connectivity methods unless otherwise noted.
MPO Breakout Cassettes feature an LGX mounting footprint and are compatible with FirstFiber rack and wall mount patch panels and interconnects.
You may also be interested in the following product(s)
FF-410 FTTH Installation and Maintenance Tools Kit |
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
 |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
 |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
 |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
 |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |
