Sales@FirstFiber.cn
Search Site

14 Port Chassis Media Converter, 48V (Dual Power), Plug-and-Play with Hot-Swap Features

SKU: 1806011115

 Sales Rep   sales@FirstFiber.cn  Tech Support  tech@FirstFiber.cn

Provides 14 slots for a standalone 10/100M media converter. The chassis has being equipped with dual cooling fans, redundant power supplies (optional)  and is designed for continuous operation.  Its Plug-and-Play and Hot-Swap features allow installing/removing the converter unit without powering off.  The chassis comes with two high quality hot swappable power supplies, either of which can be removed without disturbing operation. This means it offers total efficiency, maximum redundancy and minimum down time.

Each converter is supplied by a common shared power bus, but as an added precaution each is individually protected in the event of a  problem on the bus or from power surges.

 

Product Features

  • Accommodates up to 14 media converters operating under different protocols
  • Supports two load sharing and hot swappable power supplies
  • Two serviceable high volume cooling fans
  • LED status panel with fan, slot and power LEDs
  • Supports slot power isolation
  • Available in AC 100-240V with AC Socket or DC 48V with terminal block

 

 

Catagory Chassis Mount
Input Power AC: 100~240V 47~63Hz, DC: 48V
Operating Temperature 0 - 70°C
Height 90mm
Width 424mm
Depth 230mm                         

Use spaces to separate tags. Use single quotes (') for phrases.

Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.

firstfiber_warranty

ISO9001:2008

The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem.

          firstfiber_warranty

CE

The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.

 
         
firstfiber_warranty

RoHS

Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply.

  firstfiber_warranty

FCC

The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.